Page 103 - LIT-18626-13-53

SportsBoat_F6B12.book Page 96 Thursday, May 20, 2021 2:14 PM

Pre-operation checks

Engine shut-off switch check 195FSH SPORT / 195FSH DELUXE
Check the engine shut-off switch for proper
operation.
(1) Start the engine. (See page 98 for infor-
mation on starting the engine.)
(2) Pull the engine shut-off cord (lanyard) to
remove the clip from the engine shut-off
switch to make sure that the engine
stops immediately.
(3) Make sure that the engine cannot be
started with the clip removed from the
engine shut-off switch. TIP:
It may take up to 20 seconds for water to
reach the pilot outlet when first launching the
boat. The amount and force of the exiting wa-
1
ter will vary with engine speed.
NOTICE
A continuous flow of water from the pilot
outlet shows that water is flowing through
the engine cooling water passages. If wa-
2
ter is not flowing out of the pilot outlet dur-
ing operation, do not continue to run the
1 Engine shut-off switch
engine. Overheating and serious damage
2 Clip
could occur. (See “Over temperature
Cooling water pilot outlet check warning” on page 46 for more informa-
Check that water comes out from the pilot tion.)
outlet while the engine is running in the water.
If water is not circulating, something may be
clogging the intake grate. Refer to “Jet pump
clean-out procedure” on page 130.
190FSH SPORT / 190FSH DELUXE

96