Page 88 - LIT-18626-13-52
P. 88

SportsBoat_F4A14.book  Page 81  Monday, May 17, 2021  1:01 PM



                        Operation and handling requirements

                                                                  Draining the bilge water
                                                              NOTICE

                                                               Do  not  run the engines at  full throttle
                                                               when bilge water remains in the engine
                                                               compartment. The bilge water can
                                                               splash into the engines, which can result
                                1    2      3                  in severe damage.
                                                               Be sure all drain plugs are tightened be-
                                                               fore operating your boat. Otherwise,
                                                               water may flood the boat and cause it to
                        1  Dipstick
                        2  Maximum level mark                  submerge.
                        3  Minimum level mark
                                                              Draining the bilge water on land
                        (8) If the  engine oil  level is significantly
                                                              This model is equipped with multiple drain
                            above the maximum level mark, consult
                                                              plugs.
                            a Yamaha Boat dealer. If the engine oil
                                                              Bilge water from the various compartments
                            level is below the minimum level mark,
                                                              flows through drain passages and collects in
                            slowly add engine oil.
                                                              the bottom of the hull. The bilge water can be
                        (9) Repeat steps (6)–(8) until the engine oil is
                                                              drained from the boat by removing the hull
                            at the proper level.
                                                              drain plug.
                        (10) Securely install the oil tank filler cap and
                            turn it until it stops.
                                                              Lockable storage compartment
                        (11) Repeat the checking oil level procedure
                            for the other engine.
                        (12) Close the engine hood.
                                                                                          1






                                                              1  Drain plug












                        81
   83   84   85   86   87   88   89   90   91   92   93