Page 78 - LIT-18626-13-52

SportsBoat_F4A14.book Page 71 Monday, May 17, 2021 1:01 PM

Equipment operation

Jet wash

WARNING 1
The jet wash system must be used only by
a passenger who is not operating the boat.
While the jet wash system is being used,
the boat operator must attach the engine
shut-off cord (lanyard) to their PFD and
scan constantly for people, objects, and
other watercraft.
1 Hose fitting
NOTICE
 If the jet wash system will not be used To use the jet wash:
for an extended period, turn the shut-off (1) Connect the coil hose to the hose fitting.
valve to the closed position. To prevent
water from freezing in the jet wash hos- 2
es when storing the boat in freezing
temperatures, drain the water from the
hoses. For more information, contact a
Yamaha Boat Dealer. Before using the 1
jet wash system, make sure that the
shut-off valve is in the open position. If
water leaks from the hose fitting or coil
hose or if you notice any other problem,
turn the shut-off valve to the closed po- 1 Coil hose
sition immediately. 2 Hose fitting
 While the jet wash system is being used,
scan constantly for people, objects, and (2) Start the engines. (See page 96.)
other watercraft. Otherwise, the boat (3) Push the jet wash switch.
could collide with another watercraft, a
dock, or other obstacle.
 210FSH DELUXE: Before using the jet
wash system, make sure that the anchor JET 1
WASH
light socket is closed. If the anchor light
socket is not closed and water enters
the socket, the socket could malfunc-
tion.
The hose fitting for the coil hose is located on
the deck near the jump seat (starboard).
1 Jet wash switch

71