Page 52 - LIT-18626-13-50

SportsBoat_F4V13.book Page 44 Friday, May 21, 2021 11:45 AM

Instrument operation

The no-wake mode can be used only when To deactivate the no-wake mode:
the engine is operating at idle speed. Perform one of the following operations.
To activate the no-wake mode:  Push the minus side of the no-wake mode /
(1) Put the remote control lever in the TDE cruise assist switch until “No Wake” or “No
position or forward position so that the Wake Mode” disappears.
engine is operating at idle speed.  Push the remote control lever forward to
(2) Push the plus side of the no-wake open the throttle.
mode / cruise assist switch. Once “No
Wake” or “No Wake Mode” is displayed Operating the boat at a steady speed
in the multifunction meter, the no-wake (cruise assist)
mode is activated. The cruise assist feature is for steady engine
195S speed operation when the boat is traveling
above no-wake speeds. The cruise assist is
NW N NE
available for use whenever the engine is run-
ning above 3000 rpm and below 7000 rpm.
SPEED
To activate the cruise assist:
(1) Push the remote control lever forward to
MPH open the throttle until the desired engine
speed is reached.
No Wake (2) Push the plus side or minus side of the
no-wake mode/cruise assist switch.
Once “Cruise” and the cruise assist setting
AR195 / SX195 / AR190 / SX190 level are displayed in the multifunction dis-
play, the cruise assist is activated.
195S
10:27 am
FUEL Depth NW N NE
0 MPH SPEED
100% 9ft
No Wake Mode
0.3 Avg MPG MPH
12.3V 1350
RPM
Cruise +4
TIP:
1
The no-wake mode can be set to 3 engine
1 Cruise assist setting level
speeds. To adjust the engine speed while the
no-wake mode is activated, push the plus
side or minus side of the no-wake mode /
cruise assist switch.

44