Page 50 - LIT-18626-13-49

SportsBoat_F3R15.book Page 41 Friday, May 14, 2021 11:12 AM

Control function operation

Boat control functions AR210 / SX210 / 212 / 212S
Engine shut-off switch
WARNING
 Always attach the engine shut-off cord 2 3
(lanyard) to your PFD before starting the
engines. Failure to attach the cord could 1
result in a runaway boat if the operator is
ejected.
 Do not attach the cord to clothing that
could tear loose. Do not route the cord
in such a way that it could become en- 1 Engine shut-off switch
tangled, preventing it from functioning. 2 Clip
 Avoid accidentally pulling the cord dur- 3 Engine shut-off cord (lanyard)
ing normal operation. Once the engines
212SE / 212SD / 212XE / 212XD
have stopped, you have no steering con-
trol of the boat which could result in an
accident. Also, without engine power,
the boat could slow rapidly from planing 1
speed. This could cause people and ob-
jects in the boat to be thrown forward,
which could cause injury. 2
The clip on the end of the engine shut-off
cord (lanyard) must be attached to the engine 3
shut-off switch for the engines to run. The
cord must be attached to a secure place on 1 Engine shut-off switch
the operator’s PFD. Should the operator fall 2 Clip
overboard or leave the helm, the cord will pull 3 Engine shut-off cord (lanyard)
out the clip, stopping the ignition to the both
engines. This will prevent the boat from run-
ning away under power.

41