Page 225 - LIT-18626-13-49
P. 225

SportsBoat_F3R15.book  Page 216  Friday, May 14, 2021  11:12 AM



                                                                       Trouble recovery


                        TIP:
                        The rear platform hatch has interlocks to shut
                        off the engines should the hatch be acciden-
                        tally opened during operation.  The engines
                        will not restart unless the hatch is closed and
                        latched.

                        Raising the shift gates (212SE / 212SD /
                        212XE / 212XD)                         1
                        If the shift actuator malfunctions and the shift
                        gates remain in the lowered position, the boat  1  Manual release lever
                        will not be able to move forward.
                        After raising the shift gates so that the boat  (5) Use a screwdriver or similar tool to re-
                        can move forward, immediately return to  move the shift rod covers.
                        shore and have a Yamaha Boat Dealer ser-
                        vice the boat.                                    1
                        To raise the shift gates:
                        (1) Stop the engines and remove the clip
                            from the engine shut-off switch.
                        (2) Open the front underseat storage com-
                            partment. (See page 127.)
                        (3) Remove the nuts, and then remove the
                            shift motor cover.


                                1                             1  Shift rod cover

                                                              (6) Slide the shift rods to port (left) to raise
                                                                 the shift gates to the forward position.

                                                       2




                                                                                  1
                        1  Shift motor cover
                        2  Nut

                        (4) Move  the manual release levers of  the
                            shift motors to the manual operation po-
                            sition.
                                                              1  Shift rod




                                                                                             216
   220   221   222   223   224   225   226   227   228   229   230