Page 165 - LIT-18626-13-49

SportsBoat_F3R15.book Page 156 Friday, May 14, 2021 11:12 AM

Operation and handling requirements

To drain the bilge water from the hull: Draining the bilge water on water
Remove the hull drain plug at the stern to This model is equipped with a self-draining
drain the water. Check the condition of the deck and bilge pump to drain the bilge water
O-ring on the hull drain plug, and then se- on water.
curely install the drain plug.
Self-draining deck
Most water that enters the deck area drains
automatically out the stern through the large
drain hole in the deck.
A one-way check valve in the drain prevents
water from traveling back to the deck while
the boat is moored or moving in reverse.

Bilge pump (AR210 / SX210)
1
Your boat is equipped with a drainage sys-
tem that channels water that enters the boat
1 Hull drain plug
from the storage compartments to the bilge
under the engine compartment.
When the bilge pump switch is turned on, the
bilge pump will operate.

HORN
1
BILGE
NAVI
ANC
CTSY
LIGHTS

1 Bilge pump switch

156