Page 155 - LIT-18626-13-49

SportsBoat_F3R15.book Page 146 Friday, May 14, 2021 11:12 AM

Equipment operation

Trailering with the bimini top Bimini top (SX210 / 212)
The bimini top must be secured to the boat Setting up the bimini top
when it is being trailered. When the boat is To set up the bimini top:
trailered with a genuine Yamaha boat cover, (1) Raise the bimini top, and then unhook
simply store the bimini top in the fully col- the rear support poles from the main
lapsed position and install the storage cover. pole.
If a boat cover is not used, wrap an elastic
cord around the top and secure the ends to
the tow pylon on the wakeboard tower to re-
strict movement.

Removing the bimini top 1
To remove the bimini top:
(1) Store the bimini top. See “Storing the bi-
mini top”.
(2) While supporting the bimini top, remove
the lock pins securing the main pole to
1 Rear support pole
the wakeboard tower, and then remove
the top. (2) Secure each rear support pole to the rear
support pole mounting bracket using the
1 lock pin. Make sure that the tab on the
end of the lock pin is pointing downward.

1

2
2
1 Bimini top
2 Lock pin
3
Installing the bimini top
1 Rear support pole
To install the bimini top:
2 Rear support pole mounting bracket
When installing the bimini top, simply reverse
3 Lock pin
the removal steps, and then make sure that
the lock pins are securely installed.

146