Page 68 - LIT-18626-13-48

SportsBoat_F5K11.book Page 61 Monday, May 24, 2021 6:48 PM

Instrument operation

Flush-out ballasts the process immediately once all the water
The flush-out ballasts can be used to drain has been removed from each tank.
the water in the ballast tanks with the multi- If you have any questions, consult a
function display unit. Yamaha Boat Dealer.

To drain the water in a ballast tank: (5) When finished, tap “ON” to return to the
(1) Tap the Drive Control Screen Tab. previous screen.
(2) Tap Ballast Level.
(3) Set the value of the tank you want to
drain to 0.

Fill All Drain All
0 0 0

Back Activate

(4) Tap “ ”. “Ballast Overdrain Initiated” is
displayed, and draining starts.

Ballast Overdrain Initiated

Port Center Stbd
30 30 30

OFF ON OFF

TIP:
 The flush-out time cannot be adjusted. The
default setting is 30 seconds to avoid dam-
aging a ballast pump when there is no wa-
ter remaining in a tank and/or to prevent
excessive battery drain.
 If the flush-out time is not sufficient to re-
move all the water from a tank, continue
the draining process until it is empty. Stop

61