Page 93 - LIT-18626-13-47

SportsBoat_F4Y11.book Page 85 Wednesday, May 19, 2021 11:34 AM

Instrument operation

Drive control screen (5) 252XE: Tap the desired ballast level.
This screen can be used to set a target speed (6) 252XE: Tap “ ” or “ ” to set the
for the boat, increase the set speed. weight of each ballast tank.

WKS WKB
Target Speed 21.0
Acceleration Fast
Fill All Drain All
35 45 35

Back Activate
Set Save

TIP:
To activate the drive control:  Tap “Fill All” to make all of the tanks 100%,
(1) Tap the tab you want to set. and tap “Drain All” to make all of the tanks
(2) Tap the target speed. 0%.
(3) To set the speed, tap each digit and  Tap “Activate” to activate the ballast.
scroll up or down, and then tap the
“Back” button. (7) Tap the “Save” button.
(8) Select the characters you want to set,
tap the “Save” button.
(9) After setting the preceding items, tap the
“Set” button.
(10) Move the remote control levers to the ful-
8 0 ly open position.
TIP:
9 1  If the remote control levers are moved
slowly to the fully open position, the boat
may not accelerate according to the select-
ed acceleration profile or reach the set tar-
(4) Tap the desired acceleration profile.
get speed.
TIP:
 If the single lever mode is activated, move
You can select from “Manual”, “Slow”, and
only the remote control lever for the port
“Medium”.
engine to the fully open position. (See page
79 for information on the single lever mode
button.)
 252SD: While the DRiVE mode is activated,
the drive control mode cannot be used.

85