Page 98 - LIT-18626-13-46

SportsBoat_F4X13.book Page 91 Friday, May 21, 2021 4:49 PM

Equipment operation

(5) While pulling the main pole down, push TIP:
the snap button and shorten each for- A genuine Yamaha boat cover can be in-
ward support pole until it is locked in stalled when the bimini top is stored in the
place to tighten the bimini top. upright position.

To store the bimini top in the upright position:
When storing the bimini top, simply reverse
1 the steps for setting it up.

Trailering with the bimini top
When transporting the boat, secure the bimi-
ni top in the trailering position and install a
boat cover. If a boat cover is not used, wrap
an elastic cord around the top.
1 Snap button To secure the bimini top in the trailering posi-
tion:
(1) Follow the above steps for “Storing the
bimini top in the upright position”.
(2) While supporting the bimini top, remove
each rear support pole from the rear sup-
port pole mounting bracket using the
same procedure as for the forward sup-
port poles.
(3) Remove each rear support pole from the
main pole by removing the screw.

NOTICE 1

Do not exceed 72 km/h (45 mph) with the
3
bimini top in the up position.

Storing the bimini top in the upright
position 2
NOTICE

Do not trailer the boat with the bimini top 1 Screw
in the fully extended or upright position. 2 Rear support pole
3 Main pole
When transporting the boat, put the bimini
top in the trailering position to avoid dam-
(4) Install each trailering pole to the main
age.
pole by installing the screw.

91