Page 136 - LIT-18626-13-46
P. 136

SportsBoat_F4X13.book  Page 129  Friday, May 21, 2021  4:49 PM



                        Care and storage

                        Battery care                          (2) Apply dielectric grease or petroleum jelly
                        If the boat will not be used for more than a  to the  battery terminals and to all ex-
                        month, remove the batteries and store them  posed connectors.
                        in a cool, dark place.                (3) If the battery will be stored for a longer
                        The batteries are located in the engine com-  period, check its state of charge (use a
                        partment (port).                         hydrometer or a voltmeter and load tes-
                        To remove the batteries:                 ter) at least once a month and recharge
                        (1) Turn the battery switch to the OFF posi-  the battery if it gets too low.
                            tion. (See page 33.)              To charge the battery:
                        (2) Disconnect the ground lead (black), the  (1) Remove the caps from the cells. Add dis-
                            negative (–) battery lead (black), and the  tilled  water if necessary  to top up  the
                            negative (–) amplifier lead (black).  electrolyte to the proper level.
                        (3) Disconnect the positive (+) battery lead  (2) Follow  the battery manufacturer’s  in-
                            (red) and  the positive (+) amplifier lead  structions for charging.  WARNING!
                            (red).                               When charging a battery, keep it well
                                                                 away from sparks and open flames, as
                           1
                                                                 it gives off explosive gases. When us-
                                                         3
                                        2                        ing a battery charger, connect the bat-
                                                                 tery to the charger before you turn on
                                                        6        the charger. This will prevent sparking
                                        6                        at the terminals that could ignite bat-
                          4               4                      tery gases.
                                                              To install the battery:
                                                              (1) Place the battery in  the battery holder,
                          8                      6   5   7       and then fasten the battery using the bat-
                                                                 tery strap.
                        1  Start battery
                        2  House battery                      (2) Connect  the positive (+)  amplifier lead
                        3  Ground lead (black)                   (red) and  the  positive (+) battery  lead
                        4  Positive (+) battery lead (red)       (red) to the positive (+) battery terminal.
                        5  Positive (+) amplifier lead (red)     NOTICE: Reversal of the battery leads
                        6  Negative (–) battery lead (black)     will damage the electrical parts.
                        7  Negative (–) amplifier lead (black)  (3) Connect the negative (–)  amplifier lead
                        8  Tie wrap
                                                                 (black), the  negative (–)  battery lead
                                                                 (black), and the ground lead (black) to the
                        (4) Unfasten the battery strap, and then re-
                                                                 negative (–) battery terminal.
                            move the battery from the boat.
                                                              (4) Make sure that the battery is securely
                        To store the battery:
                                                                 held in place.
                        (1) Clean the battery casing and terminals
                            using a mixture of baking soda and water
                            (one tablespoon of baking soda to one
                            cup of water).



                        129
   131   132   133   134   135   136   137   138   139   140   141