Page 63 - LIT-18626-13-01
P. 63

SportsBoat_F6H10.book  Page 56  Tuesday, January 19, 2021  5:51 PM



                                                                 Instrument operation

                        No-wake mode/cruise assist switch
                        This switch activates and sets the no-wake     SE      S      SW
                        mode, cruise assist, and reverse RPM con-
                        trol.



                                                                              MPH
                                                                             No Wake
                                                      BLOWER
                                                                               1
                                                              TIP:
                                                         1    The no-wake mode can be set to 3 engine
                                                              speeds. To adjust the engine speed while the
                                                              no-wake mode is activated, push the  plus
                        1  No-wake mode/cruise assist switch  side  or minus side of  the no-wake
                                                              mode/cruise assist switch.
                        To operate the no-wake mode and cruise as-
                        sist, see the following sections. To activate
                                                              To deactivate the no-wake mode:
                        the reverse RPM control, see “Reverse RPM
                                                              Perform one of the following operations.
                        control” on page 57.
                                                               Push the minus side of  the  no-wake
                                                               mode/cruise assist switch until “No Wake
                        Operating the boat with a minimal
                                                               Mode” disappears.
                        wake (no-wake mode)
                                                               Push the remote control levers forward to
                        The no-wake mode is useful for operating the
                                                               open the throttle.
                        boat at a steady speed with a minimal wake.
                        This is especially convenient when traveling
                                                              Operating the boat at a steady speed
                        in harbors, channels, or other areas posted
                                                              (cruise assist)
                        with low speed limits as “no wake zones”.
                                                              The cruise assist feature is for steady engine
                        The no-wake mode can be  activated  only
                                                              speed operation when the boat is traveling
                        when the engines are operating at idle speed.
                                                              above no-wake speeds. The cruise assist is
                        To activate the no-wake mode:
                                                              available for use whenever the engines are
                        (1) Put the remote control levers in the TDE
                                                              running above 3000 rpm and  below  7000
                            position or forward position so that both
                                                              rpm.
                            engines are operating at idle speed.
                                                              To activate the cruise assist:
                        (2) Push the plus side  of the no-wake
                                                              (1) Push the remote control levers forward
                            mode/cruise assist switch.  Once “No
                                                                 to open the throttle until the desired en-
                            Wake Mode” is displayed  in the multi-
                                                                 gine speed is reached and both engines
                            function meter, the no-wake mode is ac-
                                                                 are operating at the same engine speed.
                            tivated.
                                                              (2) Push the plus side or minus side of the
                                                                 no-wake mode/cruise assist switch.
                                                                 Once “Cruise” is displayed in the multi-
                                                                                               56
   58   59   60   61   62   63   64   65   66   67   68